OpUtils

네트워크 모니터링 종합 도구 세트

OpUtils는 네트워크 엔지니어가 IT 자원을 모니터링, 진단 & 트러블슈팅할 수 있도록 도와주는 종합적인 모니터링 도구입니다.
  • 연결된 모든 포트를 찾기 위한 스위치 포트 맵퍼
  • 네트워크에서 사용하는 IP를 추적하는 IP 주소 매니저
  • 권한이 없는 네트워크 접근을 탐지하는 Rogue 탐지
  • 라우터 / 스위치의 구성 파일 백업
 
성공 사례
"Oputils은 네트워크에 관련된 문제를 최종 사용자가 알아차리기 전에 모니터링하는 단일 인터페이스를 제공해 줍니다."
- Jude Croyle, Director - IT, Meet Minneapolis » 더 보기
 
Diagnostic Tools
SNMP scan  

Oputils' diagnostic tools are used to check the availability, route and health of a system in a network using ICMP and SNMP. By drawing a graph with the available details, the tools show the status of a node. The tools also scan and check a range of IPs and come up with their status.

Tools included in this category are:

Ping – This tool is the graphic representation of the ICMP PING utility. It helps in discovery of the status of a network device, that is whether the device is alive or not. Before you ping a device you can configure the ping settings such as number of packets, time to live, size, and timeout.

Ping Scan – Using this tool you can scan an entire range of IP Addresses to check their availability. The tool displays the IP Address, the response time, and the DNS name of the discovered device. This tool uses the basic PING function as a base to perform the scan.

SNMP Ping – This tool checks whether a node is SNMP-enabled or not. It helps the network engineers know the availability of a device and provides basic information such as DNS name, system name, location, system type, and system description. Following the SNMP discovery, if required, more details of the node can be retrieved using SNMP Tools such as SNMP walker, MIB Browser and SNMP Graph

SNMP Scan – Using this tool you can scan an entire range of IP Addresses using SNMP ping and check for their availability. The tool displays the IP address, response time, DNS name, system name, and system type.

Proxy Ping – The Proxy ping tool enables you to ping a target device using a Cisco router. The router acts as the proxy for the target device and responds to the ping request.

Trace Route – This tool records the route followed in the network between the sender’s computer and a specific destination computer. The user can configure the settings such as number of hops, and timeout.

For more details on each of the tools, refer to the Diagnostic Tools section of the online help.

Switch Port & IP Address Management
 
Switch Port Mapper IP Address Manager Rogue Detection Wake On LAN MAC-IP Resolver DHCP Scope Monitor Cisco Config File Manager SNMP Bandwidth Monitor OpUtils Download View Online Demo